Auxiliaries - TDS

IC-360 Anti-Silicon
Traces of grease, oils and particularly silicone oils on the surface to be painted, in paint products or in the spraying air can cause surface defects such as “craters” or “fish eyes” in the paint film. In the medium and long term the root cause of cratering has to be identified and eliminated. IC-360 is a short-term remedy to prevent cratering in individual repairs.
IC-350 Thinner SRA
Blending thinner designed to smooth transition areas from blend-in zones to old paintwork, by dissolving rough overspray area of new and existing finishes. Suitable for panel/ spot repair.
IC-70 Retarder Solvent
Additive for use in 1K basecoats, 2K topcoats and clears at high temperature (>30°C), at high humidity level (>70%) and/or at high air speed level (>0.5m/s) in booths, to prolong volatilization of solvent and to help produce a good leveling and blushing-free refinishing job in above-mentioned circumstance.
IC-710 Adhesion Promoter
Additives used to increase adhesion power of InnoColor basecoat or Topcoat on metal substrates. Optional for 1K/2K primer.
IC-820 Quick Drier
Drying accelerator for use in IC-2K topcoats/clears. The addition of IC-820 will accelerate the chemical reaction between the hardener and the acrylic resin of the products.
IC-800 Degreaser
IC-800 are particularly well suited for removing grease, oils, wax and silicone prior to the application of InnoColor primer and for the pre-treatment of plastic surfaces.
IC-408 1K Body Filler
Single-component putty featuring good filling properties, fast-drying and easy to apply. Especially used to cover small scratches, sand holes and pinholes. Suitable for substrates such as dried and sanded existing finishes, putty, 1K and 2K primers.
IC-588 1K Body Filler
Single-component putty featuring good filling properties, fast-drying and easy to apply. Especially used to cover small scratches, sand holes and pinholes. Suitable for substrates such as dried and sanded existing finishes, putty, 1K and 2K primers.
IC-212 2K Soft Putty (BPO)
Very fine particles, good filling power, fast drying, excellent adhesion power, easy to apply and to sand. Suitable for bare metal, primers and existing finishes.
IC-1000 2K Polyester Putty(CHPO)
2-component polyester putty featuring good sanding, adhesion and filling properties; universally Suitable for bare metal, Primers and existing finishes.